RESURS – 2 Engine Restorer & Soft Engine Flush – Kit
2 Sachets of RESURS Engine Restorer 17gr
1 bottle of RESURS Soft Engine Flush
DO NOT apply 2 products at same time.
1 Step – Clean the engine with Engine FLUSH and then change the oil after 300-500km of run.
2 Step – Add RESURS Engine Restorer into the Fresh oil.
Dosage: 1 bottle & 1 sachet for for 3-5 liters of engine oil
How to use Engine Flush iMagnet.
1.Warm up the engine up to work temperature and stop it.
2.Pour the content of the bottle into the oil system. Check oil level with dipstick. It should not exceed the maximum.
3.Drive 200-500 km
4.Run the oil with engine flush off, pour new engine oil and change oil filter.
5.Enjoy results of Engine Flush iMagnet.
Composition: crudes, detergents, anti-friction and anti-corrosion additives.
How to use RESURS
Flush the engine and change the oil
Warm up the engine and turn it off;
Mix the product with 100-200 ml of oil per 1 sachet;
Pour RESURS mixture into the engine oil system;
Run engine at idle for 10-15 min
Provides soft cleaning of engine oil system and Restoration after the application of RESURS
Significantly reduce smoke and oil consumption
Increase copression for up to 40%
Removes dirt and prevents exfoliation of large particles and ingress into pipes, filters and units with close gap.
Improves work of engine units sensitive to contaminations, such as VANOS BMW, HONDA VTEC, TOYOTA VVTI, turbine and oil-cooler.